Whirlpool Refrigerator Value?

by .michael.newman.

I have a Whirlpool refrigerator model GD25DIXHW00 that I would like to sell. One problem, I have no idea what the value would be. It is in great shape and I have never had any problems with it. Could someone please give me info on value or send me in a direction where I can find the information? Thanks

Answer by imadriana
I donate a lot of stuff to charities. I received a printout from the Salvation Army, I think, that gave the IRS guidelines as to what items are worth for tax purposes.

Large appliances, in good working order that look good can be sold for 1/4 of what you paid for them, providing they are clean and don’t have any strange smells.

There are places that sell used appliances. It might be worth your time to take a trip to one of your local ones and see what they’re charging. Keep in mind that many of these places also offer a warranty, so their prices will be higher.

What do you think? Answer below!

Ice Maker 002


Image by cthoyes

There are 3 legs coming out of the compressor , how do you test the electrical motor that drives the compressor and how do you tell that the compressor is bad?

Answer by William B
use the OHM,s setting 2K a mid range or more reading is good
unless you have the spec ts on the motor its hard to tell,
if it pegs out bad motor, test one probe on ground one leg test at a time,
3 legs, 2 are hot 1 is ground,
then there is a pressure test, can,t rember all of it,

Answer by B-Notable
If the compressor is running you check the current (amperage) reading on the common terminal and compare it with the nameplate rating on the inside of the fridge. Without power there are 2 tests you can do. With the wiring disconnected, measure the resistance to ground from each terminal on the compressor. Ideally you should be using a meter that can measure up to 30 or 40 Megohms. The compressor should have more than 10 megohm resistance to ground on all three terminals, if not, it is shot. Secondly you measure terminal to terminal resistance. The compressor terminal cover or the soft gasket underneath should be marked with a C, S and R (common start and run). The resistance between common and start should be about 5 times higher than from common to run, and both readings should be less than 25 ohms. The sum of the two readings should equal the resistance between the start and run terminals. That’s it that’s all! Be careful and good luck!

Know better? Leave your own answer in the comments!
Buying Here: White Oak
Some houses have a great view, others have a great location and a few have great provenance and style; 1324 Monongahela Blvd. (MLS No. 846296) in White Oak has all three. The stone Cape Cod-style house sits on almost a half-acre and is situated atop a hill that is reached by a driveway winding through flowering trees and shrubs and a perfectly manicured yard.
Read more on Pittsburgh Post-Gazette

Whirlpool : ET0MSRXTL 24 9.7 cu. ft. Top-Freezer Refrigerator with 2 Wire Shelves Stainless Steel

• 2 Glass Shelves
• Clear Humidity-Controlled Crisper
• Reversible Door Swing

9.7 cu. ft. Top Freezer Refrigerator – ET0MSRXT

Price: $ 465.52

Learn how to remove and replace your refrigerator doors by clicking this video. Super easy to follow; super simple instructions!
Video Rating: 5 / 5